The Eneco Dongle is a P1 reader that plugs into the P1 port of your digital utility meter and shares its readings over the local network.

Supported Devices

Configuration

Installation Requirements

• The dongle must be plugged into the P1 port of your digital utility meter.
• The dongle and the Controller must be on the same local network.
• The dongle must be connected to the internet using the Eneco app or the SmartBridge Connect app from NET2GRID.

Adding the Device

1. Select Devices in the menu and start the device wizard.
2. Choose Energy Meters and select Eneco.
3. Select Ethernet TCP and search for the device with the MAC address of your dongle (this is printed on the dongle)
4. Click Search, then End scan and go to results.
5. Click Save and go to device settings, fill in the settings and click Save.